Pratissoli LK Serie Manual De Reparación página 53

Insert the O-ring on the rear cover (pos. , Fig. 91) and fasten
it to the casing with 10 x M8x20 screws (pos. , Fig. 92).
Calibrate the screws with a torque wrench as indicated in
chapter 3.
Mount the radial seal ring onto the oil seal cover (pos. ,
Fig. 93) using a buffer code 27910900.
Fig. 90
Position the O-ring (pos. , Fig. 94) in the seat of the oil seal
cover.
Fig. 91
Insert the assembly into the casing and into the seat provided,
making sure that the cover completely enters its seat (pos. ,
Fig. 95) being careful not to damage the lip of the radial seal
ring. Screw in the oil seal covers using 2 x M6x30 grub screws
(pos. , Fig. 96).
Fig. 92
53
Fig. 93
Fig. 94
Fig. 95