Sony VPH-G90E Manual De Instalación página 128

Fine Adjustment for Each Input Signal
128
(GB) Adjustments
When using multiple projectors
Input the same signal to the base projector and the projector to be adjusted.
Set COLOR TEMP in the INPUT SETTING menu to the same position on
both projectors, and then follow the procedures described above to make
the black, white and gray colors uniform between the base projector and
the projector to be adjusted.
Notes
• When adjusting the white balance, use the external color monitor for the
reference of the color.
• To adjust the white balance easily without the on-screen display, press
the STATUS OFF key on the remote commander or set the STATUS
option in the SET SETTING 1 menu to OFF.
• You can adjust the white balance more easily if you set the color level to
MIN to display the black and white picture.