Using the MENU
Pro-user/Service/Expert mode
P
G R O U P I N D E X : 0 1
SET
SETTING2
D E V I C E I N D E X : 0 1
INPUT
INFO.
S I R C S R E C E I V E R :
F R O N T & R E A R
SET
INFO
L A N G U A G E : E N G L I S H
P O W E R S A V I N G : O F F
SEL:
SET:
ENTER
GROUP INDEX
Sets the group index number with which multiple
projectors and switcher are assigned in the same group.
1 to 99 group index number can be set.
The group index number of the projector which can be
controlled with the wireless Remote Commander or an
external equipment via the PJ COM connector is
displayed in green, or the number of the projector
which cannot be controlled is displayed in yellow.
G R O U P I N D E X : 1
For details on the group index, see "Setting the Index
Number" on page 141
.
(GB)
DEVICE INDEX
Indicates the device index number which is set by the
DEVICE INDEX switches on the rear of the projector.
The device index number of the projector which can be
controlled with the wireless Remote Commander or an
external equipment via the PJ COM connector is
displayed in green, or the number of the projector
which cannot be controlled is displayed in yellow.
64
(GB)
Before Adjustment
V I D E O
EXIT: MENU
SIRCS RECEIVER
Selects the remote control detectors on the front and
rear of the projector, if the wireless remote control
does not operate correctly due to the influence of a
fluorescent lamp, etc.
P
V I D E O
G R O U P I N D E X : 0 1
SET
SETTING2
D E V I C E I N D E X : 0 1
INPUT
INFO.
S I R C S R E C E I V E R :
F R O N T & R E A R
SET
INFO
L A N G U A G E : E N G L I S H
P O W E R S A V I N G : O F F
SEL:
SET:
ENTER
EXIT: MENU
FRONT & REAR: Activates both the front and rear
detectors.
FRONT: Activates the front detector only.
REAR: Activates the rear detector only.
OFF: Deactivates both the front and rear detectors.
LANGUAGE
Selects the language used in the on-screen displays.
P
V I D E O
G R O U P I N D E X : 0 1
SET
SETTING2
D E V I C E I N D E X : 0 1
INPUT
INFO.
S I R C S R E C E I V E R :
F R O N T & R E A R
SET
INFO
L A N G U A G E : E N G L I S H
P O W E R S A V I N G : O F F
SEL:
SET:
ENTER
EXIT: MENU
Available languages are: ENGLISH, FRANÇAIS
(French), DEUTSCH (German), ITALIANO (Italian),
ESPANOL (Spanish),
(Chinese).
POWER SAVING
When set to ON, the projector goes into the power
saving mode if no signal is input for 10 minutes. The
screen enters cut-off mode. The power saving mode is
canceled when a signal is input or whenever any key is
pressed.
P
V I D E O
G R O U P I N D E X : 0 1
SET
SETTING2
D E V I C E I N D E X : 0 1
INPUT
INFO.
S I R C S R E C E I V E R :
F R O N T & R E A R
SET
INFO
L A N G U A G E : E N G L I S H
P O W E R S A V I N G : O F F
SEL:
SET:
ENTER
EXIT: MENU
(Japanese) and