Input Signals And Adjustable/Setting Items - Sony VPH-G90E Manual De Instalación

When an HDTV signal is input
You can select the items below instead of the above
items.
AUTO: Automatic setting mode. Normally set to this
position.
INT: Set to this position when using the internal sync
signal.
EXT [C]: Set to this position when using the external
composite sync signal.
EXT [HV]: Set to this position when using the
external horizontal/vertical sync signal.
Note
For an RGB signal, this item can be selected only
when SonG and C/HV are included.
SYNC ROUTE
Selects the route of the sync signal when the RGB
signal is input to INPUT A.
P I N P U T - A
C O L O R T E M P : 6 5 0 0
PIC
CTRL C L A M P : A U T O
V S H I F T : W I D E
PIC
SETTING1 S Y N C S E L : A U T O
S Y N C R O U T E : A U T O
PIC
SETTING2 V I D E O L O C K : N O R M A L
INPUT
SETTING
SET
SETTING1
SEL: SET:
ENTER EXIT: MENU
AUTO: Automatic setting mode. Normally set to this
position.
NORMAL: Set to this position for a normal sync
input, that is, when there is no video signal in the
sync line.
SYNC w VIDEO: Set to this position when the video
signal is on the sync line and the sync of the image
is distorted in the AUTO position.
VIDEO LOCK
Selects the range of the frequency deviation of the
input signal so that the INPUT MEMORY data is
switched automatically if the frequency deviation
exceeds the selected range. This item can be selected
only for RGB input signals.
P I N P U T - A
C O L O R T E M P : 6 5 0 0
PIC
CTRL C L A M P : A U T O
V S H I F T : W I D E
PIC
SETTING1 S Y N C S E L : A U T O
S Y N C R O U T E : A U T O
PIC
SETTING2 V I D E O L O C K : N O R M A L
INPUT
SETTING
SET
SETTING1
SEL: SET: ENTER
EXIT: MENU
NORMAL: Normally set to this position.
WIDE: Set to this position if the input signal is
unstable or flickers. This phenomenon may appear
during variable speed playback by the VCR. etc.

Input signals and adjustable/setting items

Item
Video or
S video (Y/C) *
Y
COLOR
TEMP
N
CLAMP
N
V SHIFT
N
SYNC SEL
N
SYNC
ROUTE
N
VIDEO
LOCK
Y: Adjustable/can be set
N: Not adjustable/cannot be set
* For the VPH-G90E model, the optional IFB-G90E Video
Interface Board is required.
Input signal
Component HDTV RGB
SDI 4:2:2
Y Y
Y
N N Y
N Y Y
Y
N Y
N N
Y
N N Y
61
Before adjustment (GB)