Resetting The Data; Resetting The Item In Adjustment Only (Normal Reset) - Sony VPH-G90E Manual De Instalación

Resetting the Data

Saving the Adjustment Data

Resetting the Item in Adjustment Only (Normal Reset)

138
(GB) Adjustments
This projector has the following reset modes.
Normal Reset mode: Resets the data being adjusted.
For resetting items, see "List of Resetting Items" on page 140
All Data Reset mode: Resets multiple items together.
For example, you can reset the data of the selected input memory, or
all the data simultaneously.
Depending on the resetting item, select the memory block which stores the
data to be reset.
• Data in the service block
• Data in the factory block
• FINE128 data (for items with the FINE mode only)
• 128 data (ZONE only)
1
Set the item you want to reset to the adjustment mode.
2
Press the RESET key once.
(Depending on the selected item, data is reset at this stage.)
If the item can be reset to the data in two or more memory blocks, the
following display appears.
(Example: To reset the green centering data)
C E N T E R I N G
D A T A R E S E T M O D E
S E R V I C E D A T A
F A C T O R Y D A T A
F I N E 1 2 8 D A T A
SEL: SET:
3
Press the v or V key to select the reset mode.
SERVICE DATA: To reset to the data in the service block
FACTORY DATA: To reset to the data in the factory block
FINE128 DATA: To reset to the data in FINE adjustment mode
4
Press the ENTER key.
The data is reset. When resetting is completed, "Reset Complete!"
appears for about 3 seconds.
Note
If you do not operate the keys within more than one minute, the display is
canceled.
G R E E N
ENTER
EXIT: MENU
.
(GB)