Using The Adjusters - Sony VPH-G90E Manual De Instalación

Using the Adjusters

When the projector installation location is not horizontal, adjust the
adjusters so that the projector is placed horizontally.
Use the supplied tool to turn the adjuster.
To raise
Turn clockwise
Supplied tool
Note
The supplied tool can rotate the screw in one direction only. To rotate the
screw in the reverse direction, turn the tool upside down.
Caution
Do not turn the tool forcibly when the screw has fully rotated. Otherwise,
the tool may slip out and injure your hand.
To lower
Turn counterclockwise
Supplied tool
Installation
19
(GB)