Saving The Standard Magnetic Focus Data - Sony VPH-G90E Manual De Instalación

Adjusting the Magnetic Focus

Saving the Standard Magnetic Focus Data

92
(GB) Adjustments
After adjusting all the magnetic focus data, save the adjusted data as the
standard data for the projector. The projector automatically changes the
magnetic focus data of position No. 1 in every input memory according to
the standard data.
1
Hold down the MEMORY key for more than 5 seconds.
"MEMORY DATA is saving !" is displayed while the projector saves
the magnetic focus data. When saving is completed, the following
display appears.
D o y o u w i s h t o e n t e r
i n t o t h e S T A N D A R D
D A T A S A V E M O D E ?
Y E S
N O
SEL: SET: ENTER
EXIT: MENU
2
Press the v or V key to select YES, then press the ENTER key.
If you select YES, the STANDARD DATA SAVE MODE display
appears.
S T A N D A R D D A T A S A V E M O D E
F O C U S D A T A
R E G I S T R A T I O N D A T A
SEL: SET: ENTER
EXIT: MENU
If you select NO, the original display is resumed.
3
Press the v or V key to select FOCUS DATA, then press the ENTER
key.
The magnetic focus data of position No. 1 in all the input memory are
changed according to the standard data saved in step 1.
Notes
• No keys function while the data is being saved.
• If the standard data save is performed, the magnetic focus data of
position No. 1 in every input memory will be changed into the
standard data. If necessary, readjust the magnetic focus for each
input signal.