Setting Memory - Sony VPH-G90E Manual De Instalación

Structure of memory blocks
Factory block

Setting memory

Channel memory
Input memory (13)
Service block
Setting memory
Channel memory
Input memory (150)
Factory Data Reset
(Normal Reset/All Data Reset)
Factory Data
Reset
User block
(All Data Reset)
Setting memory
Channel memory
Input memory (150)
Save
Creates service
data.
Service Data Reset
(All Data Reset)
Service Data Reset
(Normal Reset/All Data Reset)
Setting memory
The setting memory stores the set/adjusted data of the items that have only
one value for the projector.
Channel memory
The channel memory stores the set/adjusted data for each input channel,
such as the input channel, type of input signal, and DRC ON/OFF setting.
Input memory
The input memory stores the set/adjusted data for each input signal type.
This projector has 150 input memory.
For details, see page 133
Normal adjustment
block (RAM)
Normally used for
reflecting adjustments
directly to the projector.
Load
(automatically)
Save
(automatically or
when MEMORY is
pressed)
.
(GB)
131
Adjustments (GB)