Fl Display - Marantz SR-12S1 Manual Del Usuario

FL DISPLAY

a DISP (Display Off) indicator
This indicator lights when the SR-12S1 is in the display off condition.
s PRO LOGIC II mode indicators (MOVIE,
MUSIC, PRO LOGIC)
These indicators illuminate when one of the Dolby Pro Logic II modes
is in use.
d Circle Surround mode indicators
(CINEMA, MUSIC)
These indicators illuminate when one of the Circle Surround modes is
in use.
f ATT (Attenuation) indicator
This indicator lights when the attenuation function is active.
g DIGITAL Input Indicator
This indicator lights when digital input has been selected.
h ANALOG input indicator
This indicator lights when an analog input source has been selected.
j SIGNAL FORMAT indicators
2 DIGITAL, 2 SURROUND, dts, ES, PCM, 96kHz, HDCD, and
OTHER
When the selected input is a digital source, some of these indicators
will light to display the specific type of signal in use.
8
a s d
DISP CINEMA
PRO LOGIC PRO LOGIC
ST MOVIE MUSIC
AUTO
THX SURR EX
DIRECT AUTO SURR
TUNED
TEST COPY NIGHT
MULTI
SLEEP
M-SPKR
¡0
¡1 ¡2 ¡3
DISP
CINEMA
ST PRO LOGIC MOVIE MUSIC PRO LOGIC
AUTO
DIRECT AUTO SURR THX SURR EX
TUNED
TEST COPY NIGHT
MULTI
SLEEP
M-SPKR
™0 ¡9 ¡8 ¡7
f g h j
ANALOG
MUSIC
ATT
DIGITAL DIGITAL
SURROUND
DISC 6.1 MTX 6.1
PEAK
SLEEP
l
¡4 ¡5
ANALOG
MUSIC
ATT
DIGITAL
DIGITAL
SURROUND
DISC 6.1 MTX 6.1 PEAK
SLEEP
¡6
k ENCODED CHANNEL STATUS
indicators
These indicators display the channels that are encoded with a digital
input signal. If the selected digital input signal is Dolby Digital 5.1ch or
DTS 5.1ch, "L", "C", "R", "SL", "SR" and "LFE" will light up. If the digital
input signal is 2 channel PCM-audio, "L" and "R" will be displayed.
If Dolby Digital 5.1ch signal with Surround EX flag or DTS-ES signal
comes in, "L", "C", "R", "SL", "S", "SR" and "LFE" will show.
l Main Information Display
This display shows messages relating to the status, input source,
surround mode, tuner, volume level or other aspects of unit's
operation.
¡0 Multi-room system indicator
MULTI : This indicator lights when the multi-room system is active.
SLEEP : This indicator lights when the sleep timer to multi-room
system is active.
M-SPKR : This indicator lights when the Multi-room Speaker output
is active.
¡1 TUNER's indicators
ST (Stereo) : This indicator illuminates when an FM station is being
tuned in stereo condition.
AUTO : This indicator illuminates when the tuner's Auto mode
is in use.
TUNED : This indicator illuminates when a station is being
received with sufficient signal strength to provide
acceptable listening quality.
k
OTHER PCM
L C R
LFE
SL S SR
96kHz
OTHER PCM
L R
C
LFE
SL S SR
96kHz