Marantz SR-12S1 Manual Del Usuario página 56

GENERAL MALFUNCTION
If the equipment malfunctions, this may be because an electrostatic
discharge or AC line interference has corrupted the information in the
equipment memory circuits. Therefore:
- disconnect the plug from the AC line supply
- after waiting at least three minutes, reconnect the plug to the AC
line supply
- re-attempt to operate the equipment
Memory backup
• In case a power outage occurs or the power cord is accidentally
unplugged, the SR-12S1 is equipped with a backup function to
prevent memory data such as the preset memory from being
erased.
HOW TO RESET THE UNIT
SURROUND AV SURROUND RECEIVER SR-12S1
DOWN
TUNER F/P
STAMDBY
POEWER ON/OFF
LD DVD DSS TV VCR1 VCR2/DVD-R
PHONES
AUX1 AUX2 7.1CH INPUT ATT S-DIRECT MEMO
Should the operation or display seem to be abnormal, reset the unit
with the following procedure.
The SR-12S1 is turned on, press and hold the CD-R/MD and AUX1
buttons simultaneously for 3 seconds or more.
Remember that the procedure will reset the settings of the function
selector, Surround mode, delay time, TUNER PRESET etc., to their
initial settings.
VOLUME
DOWN UP
GYRO TUNING UP
AUTO TUNE T-MODE
AUX1 INPUT
CD TAPE CD-R/MD
DIGITAL S-VIDEO VIDEO L AUDIO R
CLEAR MULTI SPKR MULTI ROOM
53