Temporarily Turning Off The Sound; Using The Sleep Timer; Night Mode; Dialogue Normalization Message - Marantz SR-12S1 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 274

TEMPORARILY TURNING OFF THE SOUND

VOL
H
To temporarily silence all speaker outputs such as when interrupted
by a phone call, press the H button on the remote.
This will interrupt the output to all speakers and the head-phone jack,
but it will not affect any recording or dubbing that may be in progress.
When the system is muted, the display will show "MUTE" .
Press the MUTE button again to return to normal operation.

USING THE SLEEP TIMER

To program the SR-12S1 for automatic standby, tap the Sleep on the
remote.
Each press of the button will increase the time before shut down in the
following sequence.
OFF
10
90
80
The sleep time will be shown for a few seconds in the display on the
front panel, and it will count down until the time has elapsed.
When the programmed sleep time has elapsed, the unit will
automatically turn off.
Note that the SLEEP indicator on the display will light up when the
Sleep function is programmed.
To cancel the Sleep function, press the Sleep button until the display
shows to "SLEEP OFF" and the SLEEP indicator disappear.

NIGHT MODE

Tap the Night to turn on the NIGHT mode.
Selecting the Night Mode ON is effective in Dolby Digital only, and it
compresses the dynamic range.
This softens loud passages such as sudden explosions, to help
prevent disturbing others late at night.
To turn off the Night mode, tap the Night button again.
OK
CH
S
Ex
M
20
30
40
70
60
50

DIALOGUE NORMALIZATION MESSAGE

Dialogue Normalization (Dial Norm) is a feature of Dolby Digital.
When playing back software which has been encoded in Dolby Digital,
sometimes you may see a brief message in the front panel display
which will read "Dial Norm X dB" (X being a numeric value).
Dialogue Normalization serves to let you know if the source material
has been recorded at a higher or lower level than usual. For example,
if you see the following message: "Dial Norm + 4 dB" in the front panel
display, to keep the overall output level constant just turn down the
volume control by 4 dB. In other words, the source material that you
are listening to has been recorded 4 dB louder than usual.
If you do not see a message in the front panel display, then no
adjustment of the volume control is necessary.
39

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido