Boun Da R Y Ga I N Compt H X U L T R A 2 S Ub -W - Marantz SR-12S1 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 274
THX AUDIO SETUP
OSD menu system has an additional setup screen "THX AUDIO
SETUP" on the 2nd page of SPEAKER SETUP.
You can select setting of Boundary Gain Compensation and
Advanced Speaker Array.
2 - 2 T H X A UD I O S E T U P
BOUN DA R Y GA I N COMP
T H X U L T R A 2 S UB –W :
B . G . C .
A D V A NC E D S P KR AR RA Y
S URR . B S P K R
MA I N
R E T U RN
Boundary Gain Compensation
THX ULTRA2 SUB-W : Yes or No
If you have a THX Ultra2 certified subwoofer (or other subwoofer with
flat anechoic response to 20 Hz), select "YES".
If YES you can chose to activate B.G.C. (Boundary Gain
Compensation)
If NO, Boundary Gain Compensation may not be activated and the
feature is locked out.
B.G.C. : On or Off
OFF: Boundary Gain Compensation is not applied.
ON: Boundary Gain Compensation is applied.
Notes
• If you set Subwoofer = No in SPEAKER SIZE setup menu,
Boundary Gain Compensation will not be activated.
• If you set THX ULTRA2 SUB-W : Yes, The Bass Peak Level
setting is not operational.
ADVANCED SPEAKER ARRAY
SURR.B SPKR : TOGETHER, CLOSE or APART
The best ASA effect is when the Surround Back speakers are together
and facing forward.
If distance between Surround back speakers is,
• Less than 30 cm: TOGETHER
• Greater than 30 cm, and less than 122 cm: CLOSE
• Greater than 122 cm: APART
Speaker type and positioning
This diagram shows the desired positioning for 7.1 channel speaker
systems used in A. S. A. (Advanced Speaker Array) mode. During
system set-up, select the distance between Surround Back speakers.
FL
C
Front-L
Center
Front-R
Surround-L
Surround-R
SL
Surround A
Surround A
Surround Back
L
R
SBL
SBR
Surround B
Note:
• If you set SURR.BACK = 1CH or No in SPEAKER SIZE setup
menu, Advanced Speaker Array will not be activated.
Y E S
:
ON
:
T OGE T H ER
N E X T
E X I T
FR
Di-polar Radiating Speaker
Direct Radiating Speaker
SR
SPEAKER DISTANCE (TIME ALIGNMENT)
Use this parameter to specify the distance of each speaker's position
from the listening position. The delay time is automatically calculated
according to these distances.
Begin by determining the ideal or most commonly used seating
position in the room.
This is important for the timing of the acoustics to create the proper
sound space that the SR-12S1 and today's sound systems are able to
produce.
Note that the speakers that you selected "No" or "None" for in the
Speaker Config sub-menu will not appear here.
(There are several useful books and special DVD and LD's available
to guide you through proper home theater configuration. If you are
unsure, have your Marantz dealer perform the installation for you.
They are trained professionals familiar with even the most
sophisticated custom installations. Marantz recommends the
WWW.CEDIA.ORG website for further information about this).
2 - 3 S P E AK E R S D I S T ANC E
F RON T L
:
F RON T R
:
C E N T ER
:
S URR . L
:
S URR . R
:
S UB W
:
S URR . B L
:
S URR . B R
:
MA I N
R E T U RN
1.
To select the each speaker , press Up or Down cursor button.
2.
To set the distance for each speaker , press the Left or Right
cursor buttons.
3.
If you finish these setup, move cursor to "NEXT" with Up or Down
cursor button and then press OK button to go to next page.
Front –L : Set the distance from the front left speaker to your
normal listening position between 1 and 30 feet in 1.0
foot interval (0.3 to 9 meters in 0.3-meter intervals).
Front –R : Set the distance from the front right speaker to your
normal listening position between 1 and 30 feet in 1.0
foot interval (0.3 to 9 meters in 0.3-meter intervals).
Center : Set the distance from the center speaker to your normal
listening position between 1 and 30 feet in 1.0 foot
interval
(0.3 to 9 meters in 0.3-meter intervals).
Surr Left : Set the distance from the surround left speaker to your
normal listening position between 1 and 30 feet in 1.0
foot interval (0.3 to 9 meters in 0.3-meter intervals).
Surr Right : Set the distance from the surround right speaker to your
normal listening position between 1 and 30 feet in 1.0
foot interval (0.3 to 9 meters in 0.3-meter intervals).
Subwoofer : Set the distance from the subwoofer to your normal
listening position between 1 and 30 feet in 1.0-foot
intervals
(0.3 to 9 meters in 0.3-meter intervals).
Surr BACK: Set the distance from a surround back speaker to your
normal listening position between 1 and 30 feet in 1.0-
foot intervals (0.3 to 9 meters in 0.3-meter intervals).
Surr B L : Set the distance from the surround back left speaker to
your normal listening position between 1 and 30 feet in
1.0-foot intervals (0.3 to 9 meters in 0.3-meter
intervals).
Surr B R : Set the distance from the surround back right speaker
to your normal listening position between 1 and 30 feet
in 1.0-foot intervals (0.3 to 9 meters in 0.3-meter
intervals).
Notes
• Speakers that you selected "No" or "None" for in the Speaker
Size menu will not appear.
• The setting of Surr.Back L and Surr.Back R appears if set for
two surround back speakers in the Speaker Size menu.
• The setting of Surr.Back appears if set for one surround back
speaker in the Speaker Size menu.
1 0
f t
3 . 0 m
1 0
f t
3 . 0 m
1 0
f t
3 . 0 m
1 0
f t
3 . 0 m
1 0
f t
3 . 0 m
1 0
f t
3 . 0 m
1 0
f t
3 . 0 m
1 0
f t
3 . 0 m
N E X T
E X I T
33

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido