Installation Points Within The Vehicle - Babyauto ZARAUZCON fix 123 Manual De Uso

use of the vehicle, to become trapped by a movable seat or in
a door of the vehicle.
11. Ensure that the seat is not damaged by the webbing between or
underneath heavy luggage, adjustable seats or slamming the car
door etc.
12. No alterations may be made to the product as this could affect
part or the overall safety of the seat. Please, follow carefully the
installation instructios supplied by the child seat manufacturer
otherwise it could be dangerous for the child.
13. In hot weather the plastic and metal parts of the product will be
hot. You should cover the seat when the car parked under the sun.
14. In order to prevent damage to the cover, do not remove the
product's logo.
15. Use the seat even in a short journey, as this is when most
accidents occur.
16. Before the purchase, please check that the seat is properly in
your car.
17. Take a short break in long journey. So that your child has some time
for the relaxation.
18. Set a good example yourself and always wear your seat belt.
19. Tell your child that he/she should be never play with the harness
buckle
20. The figures on this manual are made to illustrate the text. The
child seat may differ from figures. Those differences will not
affect neither safety nor installation procedure.
1. OVeRVieW
A. Harness pads.
B. Group 1 Ergo seat cushion.
C. Harness straps.
D. Locking buckle.
E. Harness adjustment button.
F. Harness adjustment strap.
G. Abdominal belt hook.
H. Isofix connectors.
18
I. Top Tether safety brake.
J. Top Tether.
K. Headrest height adjuster
button.
L. Slot for regulating the height
of harness straps.
M. Metal harness connector.

2. iNstAllAtiON POiNts WitHiN tHe VeHiCle

Facing the direction of travel
Facing away from the direction of travel
With the 2-point belt (car seatbelt)
On seats with:
ISOFIX hooks (between the seat and the seat back)
and Top Tether anchorage points (such as on the rear
shelf, on the ground or behind the seat) and a 3-point
seatbelt (car seatbelt)
3. iNstAlliNG tHe CHild seAt. isOfix + tOP tetHeR.
NOtifiCAtiON
1. Press the unlock buttons on the ISOFIX system and, keeping
them held down, pull out the ISOFIX adapters until they are
completely open (fig. 3.1).
2. Fasten the ISOFIX adapters to their respective connectors on the
car seat, ensuring that they make a "click" sound when they lock
(fig. 3.2 and 3.3).
3. Push the child seat against the car seat to check that the
ISOFIX system is fully latched, ensuring that the child seat is
completely in contact with the car seat (fig. 3.4).
Uninstalling the iSOfix system
1. Press the unlock buttons on the ISOFIX system and, keeping
them held down, pull backwards. The device will open, thereby
releasing the child seat (fig. 3.5).
Only for use with Group 1 from
approx. 9 months to 4 years of
age (9-18 kg)
19