Uses In The Vehicle - Babyauto more WERDU RWF DS15 Manual De Instalación

2. UsEs IN ThE vEhIclE

WhERE:
In the vehicle rear seats.
Please, do NOT install the safety seat in
forward seats except for the following
cases:
1. whenever the vehicle does not count
with rear seats.
2. when all rear seats are already occupied
by children exceeding 135 cm height.
3. when it is not possible to install all child
restraints systems in the rear seats.
hOW:
GROUP 0+ /1 • Install rearward facing.
GROUP 1 • Install forward facing.
GROUP 2/3 • Install forward facing.
(vehicle's 3 point belt).
Notice
The child seat must only be used in this
seat IF it has a lap and diagonal belt (3
points).
36
3 point belt.
—
2 point belt.
A
Diagonal belt
A
section.
b
1
Abdominal belt
b
section.
c
c
c
c
ISOFIX securing
c
point.
1
2
2
WARNING / Refer to the vehicle's instruction
manual to install the seat in the front seat.
The seat offers a number of assembly options. The
following table shows the installation types for each
group:
OPTION 1 / WITH THE VEHICLE'S BELT
SEAT CHILD
GROUP SEAT POSITION
INSTALLATION INSTALLATION
0+ 3 point
• Rearward facing 5-point belt
0-13 kg vehicle's belt
1 • Rearward facing 3 point
5-point belt
9-18 kg • Forward facing vehicle's belt
2/3 3 point Vehicle's
• Forward facing
15-36 kg vehicle's belt belt
OPTION 2 / WITH THE VEHICLE'S BELT+ISOCLICK FIX®
ORIENTACIÓN SEAT CHILD
GRUPO
DE LA SILLA INSTALLATION INSTALLATION
Isoclick Fix®
0+
• Rearward facing + vehicle's 5-point belt
0-13 kg
belt
Isoclick Fix®
1 • Rearward facing
+ vehicle's 5-point belt
9-18 kg • Forward facing
belt
Isoclick Fix®
2/3 Vehicle's
• Forward facing + vehicle's
15-36 kg belt
belt
1 2
fig. 1
3 4
Press
3. GENERAl sEAT UsE
3.1. how to use the harness buckle
1. Bring the two clasps together (fig.1.1).
2. Make sure the correct side is facing up (fig.1.2).
3. Fasten the two clasps together before inserting
them into the harness buckle. You should hear a
click (fig.1.3).
4. Pull the harness adjustment belt (14) so that the
part of the strap that covers the lap is not loose,
ensuring the harness is taut and the buckle closed.
(7)
Open the harness buckle by pressing the red
button (fig.1.4).
3.2. harness buckle care
In order to ensure child safety it is essential that
the harness works correctly. If this is not the case
it is probably because of an accumulation of dirt or
foreign bodies.
37