Adjusting The Recline Position - Babyauto MORE LENNOX 01 Manual De Instalación

3.4. Adjusting the length of support leg
1. Turn out the support leg
the seat (fig. 3.4.1)
Important: You will hear a click that means the
support leg is in the right angle.
2. Push the support leg adjusting button
regulate the length of the leg (fig. 3.4.2).
3. Extend the length of the support leg until it rest
firmly on the floor of the vehicle. The indicator
will show green (fig. 3.4.3).

3.5. Adjusting the recline position

For group 1, this child seat provides 5 recline positions
(in red color) and 1 recline position for group 0+ (in
blue color).
Reclining the seat. Group 1
1. Check that the seat is in forward facing.
2. Push the button (F)
pull or push the seat forwards or backwards to
select the desired recline position
(fig. 3.5.2).
(I)
located in the base of
(K)
(fig. 3.5.1) and sametime,
5 4 3 2 1
Reclining the seat. Group 0+
1. Once the seat is rearward facing, automatically is
placed in the corresponding recline position for
this group
3.6. Rotation of the seat
and
This car seat can swivel 360° adopting the position
rearward facing (group 0+) or forward facing
(group 1) without the need to uninstall the seat.
Swivelling the seat rearward facing
1. Find the rotation lever
side of the seat.
2. By pulling the lever upwards, with the other hand,
push to rotate 180° and place the seat rearward
facing in the opposite direction of travel. (fig.
3.6.1 y fig. 3.6.2).
3. You will hear a "click" which indicates that it is
securely locked.
Swiveling the seat forward facing
1. Beginning in the recline position
steps described in the previous chapter to rotate
the seat 180°.
.
1
(H)
located in the front
1 , repeat the
21