IKOS ECOpellets Insert Manual Del Usuario página 104

Meaning of each variable
tF
tA
EN
FL
UF
Co
St
–
FC
–
Access the menu selection of combustion power
Access the menu pellet load
Access the menu adjustment pellet recipe
Exhaust
Temperature [°C]
Room
Temperature [°C]
Primary air flow
speed
Extractor [RPM]
Auger Motor [s]
Service [h]
Working time [h]
Firmware
Cod. Artic.
Function
USER'S MANUAL
Read in degrees Celsius (°C) reports the exhaust
temperature monitored by the thermocouple.
Read in degrees Celsius (°C) reports the ambient
temperature monitored by the outdoor NTC probe.
Read in dimensionless quantity informs the flow of
air entering the unit.
Read in revolutions per minute informs about the
rotational speed of the extractor.
Read in seconds informs time within 4 seconds that
the auger motor is active and feeds pellets to the
burner.
Read in hours reports the number of missing hours
to report malfunctions for lack of maintenance.
These must be checked by the technical service
during maintenance. The period for maintenance
must respect the kilos of burnt pellets.
Read in hours reports the number of hours in on,
modelling and security.
Firmware code and revision
Product code
Procedure
• In the initial menu, press the B2 key to
access the Power Selection menu;
• The power value is flashing;
• Clicking on successive times it is possible
to change the combustion power between
automatic (controlled by ambient
temperature) and manual and in the latter
between 1 and 5 being 1 the lowest power
and 5 the highest power;
• Do not touch the display for 5 seconds to
exit and save the new value.
• In the initial menu, press the B2 key for 3
seconds to activate the pellet load;
• The status count can be checked in
seconds on the screen;
• Press B1 or do not touch the display for 300
seconds to exit.
• In the initial menu, press key B3 for 3
seconds to activate access/view the current
pellet recipe;
• The current recipe can be checked on the
screen;
• Press B3 for 3 seconds to correct the pellet
recipe, or do not touch the display for 5
seconds to exit;
EN // 104