IKOS ECOpellets Insert Manual Del Usuario página 96

Recommendations
Material Type of attachment
FMS M8x60 Ø10
Massive (slab, stone)
Metallic
EN
FIP M8x60 Ø10
Massive and non-massive (brick)
Chemical
It is very important that the base where the insert is installed is completely horizontal.
If you do not have a base, the optional extendable table is available. This table is a metal
structure that must be fixed to the floor and to the wall. The table can be adjustable in height
between 300 mm (minimum) and 545 mm (maximum), it is very important to ensure that the top
is perfectly horizontal for the correct operation of the equipment. Together with the extendable
table, screws are delivered to secure the base of the insert to the table, with the same 7 screws,
it is possible to attach the equipment to an existing base.
Connect the 80 mm diameter pipe between the flue gas outlet and the flue outlet to the outside
of the building (e.g. fireplace).
After securing the base of the equipment and the chimney being installed place the moving
part of the equipment.
Then do a rotating motion to bring the equipment to the horizontal.
Instalação inserível
10°
1 2
EN // 96
USER'S MANUAL