IKOS ECOpellets Insert Manual Del Usuario página 107

Select chrono mode
Select day of week
Selecting program start and end times
Selecting program start and end times
Repeat the previous process for all desired days.
When programs are developed around midnight in order to start operating the day before and
end the operation the next day will be relevant:
• Finish the last program the day before at 23:59;
• Start the first program the next day at 00:00.
In the week and week/weekend modalities the implementation of programmes follows the
same logic exemplified above.
Function sub-menu Date and Time
Access the menu sub-menu chrono
Access the menu date and time
Access the menu date and time
• In the menu "Chron" Chronograph Program
with B3 and B4 select Daily, weekly, or,
Weekend (you must respect the mode
already selected;
• Press B2 to validate.
• In the "Daily" menu with B3 and B4 select
the desired day of the week;
• Press B1 for 3 s to validate and enter the
programming for that day.
• In the menu of the selected day, press B2 to
activate selection mode;
• With B3 and B4 and with the times flashing,
select the start time;
• Press B2 to validate;
• Repeat previous procedure for minutes (it
is possible to increment every 15 minutes,
except for the possibility to choose 23:59).
• Repeat process for End Time and other
available times if applicable.
• In the initial menu, press B2 and B4 at the
same time;
• The first sub-menu "Air" heating power can
be checked on the screen.
• In the advanced menu with B3 and B4 select
the Sub-menu "oroL" Date and Time;
• Press B2 to validate.
• In the "oroL" menu Date and Time with B1
activate change and select correct time;
• Press B2 to validate and move to minutes;
• Repeat previous action for day of week and
• press B2;
• Do not touch the display for 5 seconds to
exit.
EN // 107
USER'S MANUAL
Procedure
EN