IKOS ECOpellets Insert Manual Del Usuario página 105

Access the menu adjustment pellet recipe
Access the menu air recipe adjustment
Access the menu thermostat temperature
adjustment
Sub-menu
The internal display also has a sub-menu although limited to access to some control variables.
Function sub-menu Air
Access the menu sub-menu air
Access the menu ambient fan speed adjustment
• To correct and after previous action the
value will flash and with B3 and B4 adjust to
the new desired value;
• In this menu with B3 and B4 you can adjust
the amount of pellets to feed between -7
(-25%) and 7 (+25%), or do not touch the
display for 5 seconds to exit.
• In the initial menu press key B4 for 3
seconds to activate access/display the
current air recipe;
• The current recipe can be checked on the
screen;
• Press B4 for 3 seconds if you want to correct
the pellet recipe, or do not touch the display
for 5 seconds to exit;
• To correct and after previous action the
value will flash and with B3 and B4 adjust to
the new desired value;
• In this menu with B3 and B4 you can adjust
the amount of combustion air to feed
between -7 (-25%) and 7 (+25%), or, do not
touch the display for 5 seconds to exit.
• In the initial menu, press key B4 to display
the temperature selected for thermostat
temperature;
• The selected temperature can be checked
on the screen;
• Since this model is always supplied with
the external radio display/command,
this temperature does not influence the
operation of the device;
• Do not touch the display for 5 seconds to
exit.
• In the initial menu, press B2 and B4 at the
same time;
• The first sub-menu "Air" heating power can
be checked on the screen.
• Press B2 to access the Air menu and
change the power/speed of the ambient
tangential fan between automatic, or
manual and in the latter between 1 to 5 with
1 the lowest speed and 5 the highest speed;
• Press B2 to validate and then B1, or do not
touch the display for 5 seconds to exit.
EN // 105
USER'S MANUAL
Procedure
EN