Commands Description; Quad 450 Ac/Dc - Sol Welding QUAD Serie Manual De Instrucciones

Instruction Manual
6.

COMMANDS DESCRIPTION

Fig. 1
12
11
Front Panel
assembly
12A
12B
10
10A
9
8
7
(*) Use it only for Software download.Remove the front panel
(4 screws) to find the download switch and the RS232 con-
nector. For any other informations, please contact our nearest
service point.

QUAD 450 AC/DC

POS. 1 =
1
POS. 2 =
POS. 3 =
2
POS. 4 =
3
POS. 5 =
POS. 6 =
4
POS. 7 =
5
POS. 8 =
POS. 9 =
6
POS. 10 =
POS. 10A = 3 pins plug for the connection torch switch
POS. 11 =
POS. 12 =
POS. 12A = (*) switch to allow the software download
POS. 12B = (*) RS232 socket for program download
Bull eye hook to move the generator
HF ON / OFF switch
Programs protection key (See page 18)
Quick release connectors for inlet (blue) and outlet (red).
For TIG and TIG COLD WIRE FEEDER applications
Output power socket for TIG/TIG COLD WIRE torch and
ELECTRODE holder plug
7 pins socket for remote control
7 pins socket for COLD WIRE FEEDER
GAS output for TIG and TIG COLD WIRE applications
Output socket for base material that has to be welded
(Ground)
3 pins socket for torch switch connection (pins 1 and 2)
(connect to torch TIG / TIG COLD WIRE)
Power Source Main Switch "ON - OFF"
Front panel control board (see figure 3 to page 9)
QUAD AC/DC SERIES
GB
7 GB