Sol Welding QUAD Serie Manual De Instrucciones página 54

Instruction Manual
6.
COMMANDS DESCRIPTION
79
80 81
91
GB
12
WIRE FEEDER PLUS 90
75
76
77
78
Fig. 6
82 83 84 85 86 87
88
89
90
(MIG/MAG Synergy Wire Feeder)
POS. 75 = Interconnecting cables 7 pins and 14 pins socket.
POS. 76 = Positive input (+) power socket
POS. 77 = Quick release connectors for inlet (blue) and outlet (red) for
MIG/MAG water cooling torch.
POS. 78 = GAS inlet connector
POS. 79 = Interconnecting cables securing plate.
POS. 80 = Display for the visualisation of parameters in Pos. 81-
82-83-84 and of the real current during welding.
POS. 81 = SET CURRENT Led.
POS. 82 = COLD WIRE Speed Led.
POS. 83 = ARC LENGTH Led.
POS. 84 = TWIN PULSE FREQUENCY Led.
POS. 85 = Display for the visualisation of parameters in Pos. 86-87-88-
89 and of the real voltage during welding.
POS. 86 = ARC VOLTAGE Led.
POS. 87 = MATERIAL THICKNESS Led.
POS. 88 = ELECTRONIC INDUCTANCE Led.
POS. 89 = JOB # SELECTION Led.
POS. 90 = Knob/push button for regulation and visualisation of the
selected parameter. Press in order to select the desired
parameter which will be shown on display (85)
POS. 91 = Knob/push button for regulation and visualisation of the
selected parameter. Press in order to select the desired
parameter which will be shown on display (80)
QUAD AC/DC SERIES