Sol Welding QUAD Serie Manual De Instrucciones página 72

Instruction Manual
Syncro Cold Wire feeding frequency:
Full synergy in AUTO mode.
Direct regulation in MAN mode.
Description:
Synchronises the intermittent wire feeding to a defined frequency,
also if the welding current is not pulsed.
Wire Retract:
Direct regulation OFF – 1 – 10.
1 = roughly 1mm of wire retract
10 = roughly 10mm of wire retract.
Description:
Retracts the wire at high speed at the end of the welding arc and in
Syncro mode, it will retract the wire at the end of the ON pulse.
When selected, the wire feeding cycle can be divided in 4 sectors.
1
Pushes the wire at high speed
1 =
Feeds the wire
2 =
Retracts the wire at high speed
3 =
Stand by
4 =
GB
30
2 3
Fig. 11
I
2
No
Stand by Wire
amount
retract
No
This system allows to obtain a filling material deposit during wel-
4
ding very similar to the result that an expert TIG welder would have
by using manual welding rods.
QUAD AC/DC SERIES
Fig. 12
No
Continuos Stop Retracts
feeding at high
speed
No
Stand by
as per
synchro-
nization
cycle.