Operating Modes; Normal Mode - Eaton Pulsar Serie Manual De Instalación Y De Usuario

3.2

Operating Modes

Normal mode

AC out of tolerance
86-87021-00 A01 - Page 26
This is the standard operating mode, set by default in the
factory.
Under normal conditions (Normal AC source available):
LED (20) is ON.
LEDs (30), (32), and (34) are green.
The equipment is protected by the UPS.
If normal AC source is out of tolerance:
LEDs (20), and (21) are ON.
LEDs (30), (32), and (34) are green.
The equipment is protected by the UPS.