Menu Navigation - Uline OHAUS EXPLORER H-4737 Manual Del Usuario

Stopwatch: To use the built-in stopwatch
application, touch STOPWATCH. A countdown
timer with interval (lap) timer is available.
• Press START to begin using the stopwatch timer.
• Press RESET to reset the timer to zero.
• Touch CLOSE to close and return to the current
application.

MENU NAVIGATION

TO ENTER/EXIT THE MENU
All menu navigation is performed by touching the display.
To enter the menu, touch MENU from any application home
screen. The main menu appears, with buttons for MAIN,
BACK and DONE. Continue touching the appropriate list
item to navigate to the menu items or touch a button to
change location.
Main
CHANGE MENU SETTINGS
To change a menu setting, navigate to that setting using
the following steps:
1. Enter the Menu: From any application screen, touch
MENU. The main menu list appears on the display.
2. Select Sub-Menu: Scroll down to the selected item
of the main menu list and touch it. The sub-menu
appears.
3. Select the Menu Item: Continue until the desired setting
is chosen in the menu list. Touch the setting to change it.
The changed setting will be displayed as highlighted
for two seconds to confirm the changed value.
4. Exit the Menu and return to the current application:
After the setting is confirmed, touch DONE to return to
the application.
NOTE: at any time the MAIN, BACK and DONE
buttons can be touched to navigate to the
desired area of the menu or return to the current
application.
PAGE 3 OF 96
OVERVIEW OF CONTROLS CONTINUED
Back Done
Logout: Used for user logout and return to User
Login screen. This feature is only active if a
user profile has been created and a user has
logged in.
OPERATION
MENU LIST
Calibration: Touch to view calibration options.
User Settings: Touch to view user preferences.
Balance Setup: Touch to view balance settings.
Application Modes: Touch to view application
modes.
Weighing Units: Touch to view weighing units.
GLP and GMP Data: Insert user data for
traceability.
Communication: Touch to view COM device
settings and print settings.
Library: Touch to delete all library records.
Diagnostics: Touch to view diagnostic items.
Factory Reset: Touch to do a factory reset.
Lockout: Touch to access the lockout menu list.
I/O Settings: Touch to view remote I/O settings.
Information: Touch to view list of topics.
0721 IH-4737