Troubleshooting And Repairs - Starmix GS H-1150 ATEX Zone 22 Instrucciones Para El Manejo

7 Troubleshooting and repairs

Fault
Low suction
Vacuum not starting
Dust being emitted
Vacuum cleaner electrostatically
charged
Level indicator lit
Device switches off
Do not proceed to make any further interventions - contact customer service.
Model variant
1)
Cause
Cover not properly closed
Filter dirty
If cleaning insufficient
Plus for dust class H
Filter bag full
Container full
Nozzle, tubes or hose clogged
Switch defective
Not connected to power
No power
Power cord defective
Filter defective
Incorrect filter
Incorrectly earthed
Non-approved accessories used
Bag/cartridge filter clogged
Suction hose clogged
Container full
Safety shutdown if the connection
piece is closed / the hose is
blocked
Solution
Close cover
Carry out cleaning
Check / replace bag filter
Check / replace cartridge filter
Replace
Empty
Clean
check and replace as necessary
Plug in
Check fuse
Have replaced
Shut off the device immediately!
Check and replace filter
Check filter and replace with fitting
original filter
Check and restore earthing
Always use original
(electroconductive) accessories
Clean or replace filter
Remove vacuumed material from
hose
Empty container
Remove plug/
Remove suction material from
hose
EN
33