Siemens SITRANS F FST020 IP65 NEMA 4X Instrucciones De Servicio página 17

Default Flow Display Screen
The default display screen shows two lines of flow rate data (see figure below):
①
②
Figure 3-2
● First Character Field - Displays the channel number.
● Middle Character Field - Displays the numeric value of the data item selected.
● Last Character Field - Provides a mnemonic of the data type currently displayed.
Selecting Display Data Items
The arrow keys are used to select the data items that are shown on each display line as
follows:
Right Arrow
● Upon pressing the <Right Arrow> key, a selection cursor will appear under the channel
● Pressing the <Right Arrow> key once again will cause the selection cursor to move to the
Up/Down Arrows
● Once a display line is selected as described above, use the <Up or Down Arrow> keys to
FST020 IP65 NEMA 4X Quick Start
Operating Instructions, 08/2014, A5E03086489-AJ
Channel Number
Numeric Data
Display Screen
indicator numeral (i.e., 1).
other display line and so forth.
Note
The selection cursor will turn off after a period of inactivity.
scroll through the available data items at the selected display line. These measuring
parameters may include Vs M/S, Velocity F/S, Signal mV, Valc, Aeration, Flow, Total
Flow, etc.
2.2 Mounting the Transmitter
③
Units
④
Selection Cursor
Connecting
15