Siemens SITRANS F FST020 IP65 NEMA 4X Instrucciones De Servicio página 28

Connecting
3.2 Programming the Transmitter
3. The drop down menu lists the following sensor selections:
– 7ME39501G
– 1011 Universal - Usable -40 to 120°C
– 1011HP-T1 - Usable -40 to 120°C, recommended for Ø Temperature <40°C;
– 1011HP-T2 - Usable -40 to 120°C, recommended for Ø Temperature >40°C - <80°C;
– 1011HP-T3 - Usable -40 to 120°C, recommended for Ø Temperature >80°C <120°C;
– 1021 Sensor
– 991 Universal
4. For this example, select the sensor model that appears on the sensor label then press
<ENTER>.
5. Press <Down Arrow> key to select [Sensor Size]. Press <Right Arrow> key and scroll to
select the sensor size that matches the size indicated on the sensor label.
6. At [Sensor Mount Mode] press <Right Arrow> key. Scroll to select [Reflect] or [Direct]
mount then press <ENTER>.
7. IMPORTANT: Press the <Up/Down Arrow> keys to scroll to [Spacing Method] and
[Number Index]. Record these numbers. They will be used to mount the sensors.
8. Sensors can now be mounted. Proceed to Sensor Installation (Page 27) mounting
procedures and select the mounting mode desired.
9. Once sensor mounting is complete proceed to Commissioning (Page 33).
26
Standard.
Named as high temperature.
special request.
FST020 IP65 NEMA 4X Quick Start
Operating Instructions, 08/2014, A5E03086489-AJ