Siemens SITRANS F FST020 IP65 NEMA 4X Instrucciones De Servicio página 24

Connecting
3.2 Programming the Transmitter
Table 3- 2 Pipe Configuration Option List Definitions
Fully Developed
1 Elbow
Dble Elbow+
Dble Elbow-
Valve
Expander
Reducer
Norm Entry
Header Inlet
Intrusions
Sensor Identification
The sensor part number located on the front face provides a detailed identification. For
example, the Part Number:
①
②
③
④
Note
Check to make sure that the sensors are a matched set with the same serial numbers and
marked with an "A" and "B" (e.g., 19256A and 19256B).
22
Options
Model
Hi Precision
NEMA w/F-Conn
Pipe Material
Fully developed flow, as would be expected for very long
straight pipe runs or installation downstream of a flow
condition.
Single 90 degree Elbow upstream of sensor installation.
Double out-of-plane Elbows upstream of sensor installation.
Double in-plane Elbows upstream of sensor installation.
Consult factory.
Pipe expansion upstream of sensor installation.
Pipe reduction upstream of sensor installation.
Consult factory.
Header or pipe manifold upstream of sensor installation.
Consult factory.
1011HNFS-D1H-UT1-S2
⑤
⑥
⑦
Definitions
means:
Size
Temperature
Agency Approved
FST020 IP65 NEMA 4X Quick Start
Operating Instructions, 08/2014, A5E03086489-AJ