Installing/Mounting; Application Guidelines; Mounting The Transmitter - Siemens SITRANS F FST020 IP65 NEMA 4X Instrucciones De Servicio

Installing/Mounting

2.1

Application Guidelines

Basic Requirements
● Determine pipe material and dimensions.
● Avoid vertical pipes flowing in a downward direction.
● Avoid installation of sensors on the top and bottom of horizontal pipes, where possible.
● Select a location with the longest straight run of pipe.
● Identify upstream piping configuration (elbow, reducer, etc.).
● Pipe surface should be smooth and, if necessary, free of dirt and grease.
● Avoid pressure reduction components upstream, where possible.
● Avoid mounting on or near weld seams.
● Pipe must be full during set-up.
2.2

Mounting the Transmitter

Hazardous Voltage
May cause death or serious personal injury.
Disconnect power before working on this product.
FST020 IP65 NEMA 4X Quick Start
Operating Instructions, 08/2014, A5E03086489-AJ
WARNING
2
7