Connecting - Siemens SITRANS F FST020 IP65 NEMA 4X Instrucciones De Servicio

Connecting

Note
If the transmitter is not already mounted and cabling has not been run, proceed to Mounting
the Transmitter (Page 7) before connecting power.
Hazardous Voltage
Will cause death or serious personal injury.
Disconnect power before working on this product.
1. Using a flat-head screwdriver, loosen the six securing screws from the Keypad Enclosure
2. To determine type of power connection refer to the following part numbers:
FST020 IP65 NEMA 4X Quick Start
Operating Instructions, 08/2014, A5E03086489-AJ
DANGER
Cover and open cover.
– 7ME3570-1HA3 = AC Power (with 500mA fuse)
– 7ME3570-1HB3 = DC Power (with 2A fuse)
Note
The product nameplate also lists the actual power that can be applied to the unit.
3
11