Dynamic Alignment - Blatchford Elan Serie Manual De Instrucciones

9.4 Dynamic Alignment

Click on:
Resistance Setup
A
to select the Basic Resistance Settings screen.
Dynamic Alignment Procedure
1. Instruct the user to walk for
approximately 3 minutes to become
familiar with the resistance settings.
2. Adjust the Plantar flexion and
Dorsiflexion hydraulic resistance
settings to optimize the Elan to suit
the user's preference for normal
walking.
[ Note the scale is from 4 to 7 ]
3. Allow some time for practice and
familiarization with the ankle
resistance settings.
4. Verify that the hydraulics are
moving when walking using
the Vector Indicator. Reduce the
resistance settings if minimal
movement is shown.
A
B
B
C
Power Save/ Sleep
z
z
z
If the Elan detects no movement for
approximately 90 seconds it activates
power saving mode, the Power Save
symbol appears on the Status Bar and
all the indicators will stop moving.
Moving the Elan will automatically
bring it back to normal operation.
18
C
938317S/3-0719