Spring Replacement - Blatchford Elan Serie Manual De Instrucciones

10 Maintenance Instructions

Spring replacement

3
Remove heel spring and screws.
5
Re-assemble with replacement heel spring.
Use Loctite 243 (926012) and torque to
15 Nm.
7
If a foam cosmesis is to be fitted, roughen
top surface of foot shell to provide ideal
bonding surface.
4
4
15 Nm
(cont.)
4
Remove toe spring screw, replace toe. Upon
reassembly, use Loctite 243 (926012) and
torque to 35 Nm. Ensure toe spring is central
to the carrier.
6
8
Lubricate toe and heel if required.
(Footshell is pre-lubricated).
23
8
35 Nm
Cover appropriate
lines on carrier
with permanent
black marker to
leave spring set
number showing.
Fit sock as shown.
928017
938317S/3-0719