Ricoh Pro C5300S Manual Del Usuario página 10

Requirements for Relocating Machines
CAUTION
• When moving the machine, do not hold the control panel. Doing so may
damage the control panel and can result in injury or malfunction.
• Do not push on the auto document feeder (ADF) when moving the machine.
If you apply force on the auto document feeder (ADF), it may become
misaligned, causing copied or scanned images to become distorted.
• When carrying or moving the machine by lifting it for relocation to another
floor, contact your service representative. Dropping or toppling the machine
can result in injury or malfunction.
• After moving the machine, use the caster fixture to fix it in place. Otherwise,
the machine might move or topple over to cause injury.
• When moving the machine, make sure to unplug the power cord from the wall
outlet and confirm that line cords and other connecting cables have been
removed. Otherwise, the power cord is damaged, possibly resulting in fire
or electric shock.
Requirements for Using the Machine
CAUTION
• Do not look into the light source. Doing so may damage your eyes.
• Do not use stapled sheets of paper, aluminum foil, carbon paper, or any kind
of conductive paper. Doing so can result in fire.
• Keep SD cards and USB flash memory devices out of reach of children. If a
child accidentally swallows an SD card or USB flash memory device, consult
a doctor immediately.
• When lowering the ADF, do not place your hands on the hinges and exposure
glass. Your hands or fingers are caught, which can result in injury.
• When you open the bypass tray when a banner sheet guide tray is installed,
do not put your hands on the front side and the back side of the place indicated
by the label of the banner sheet guide tray. Otherwise, your fingers might be
caught, resulting in injury.
CAUTION
• Keep your hands clear of the paper output slot of the finisher booklet tray
when pulling it out or pushing it in the finisher's staple unit. You may trap your
fingers in the machine's gap and injury can result.
• Do not push or pull the attention light when installed to the machine. Doing so
may result in damage or malfunction of the attention light or the machine.
Requirements for Handling the Machine's Interior
WARNING
• Do not remove any covers or screws other than those explicitly mentioned in
this manual. There are high voltage components inside the machine that can
cause electric shock. Also there are laser components inside the machine
that can cause blindness. Contact your sales or service representative if any
of the machine's internal components require maintenance, adjustment, or
repair.
• Do not disassemble or modify this machine. Doing so can result in fire and
electric shock. Also, exposure to the laser components inside this machine
risks blindness.
CAUTION
• There are highly-heated parts inside the machine. When removing misfed
paper, do not touch areas other than those specified in this manual. Touching
those areas can result in burns.
• Although the machine is designed so that a safety device protects users from
injury, take care not to touch the rollers during operation. The rollers may
pinch before stopping completely.
• Contact your sales or service representative for cleaning the machine's interior.
If the machine's interior is not regularly cleaned while dust accumulates, fire
and malfunction can result.
• When replacing paper or removing jammed paper, make sure not to trap or
injure your fingers.
• Keep your hands clear of the paper output slot of the finisher booklet tray
when pulling it out or pushing it in the finisher's staple unit. You may trap your
fingers in the machine's gap and injury can result.
8