Ricoh Pro C5300S Manual Del Usuario página 21

Notes to USA Users of FCC Requirements
Part 15 and 18 of the FCC Rules.
Note
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 and 18 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.
Caution
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
This transmitter must not be co-located or operated in conjunction with any other antenna or
transmitter.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment
should be installed and operated keeping the radiator at least 20cm or more away from
person's body (excluding extremities: hands, wrists, feet and ankles).
Supplier's Declaration of Conformity
This device complies with part 15 and 18 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
Responsible party: Ricoh USA, Inc.
Address: 300 Eagleview Boulevard, Suite 200 Exton, PA 19341, U.S.A.
Telephone number: 610-296-8000
Product Name: Multifunction Digital Product(Copier/Printer/Scanner)
Model Number:
• Pro C5300S
• Pro C5310S
Using the Shield Cable
Properly shielded and grounded cables and connectors must be used for connections to a
host computer (and/or peripheral) in order to meet emission limits.
Installing the Ferrite Core
Attach a ferrite core to the following cables to prevent RF interference:
• An Ethernet interface cable connecting to the Device Server Option port
Part 68 of the FCC Rules regarding Optional Facsimile Unit
1.This equipment complies with Part 68 of the FCC rules. On the cover of this equipment
is a label that contains, among other information, the FCC registration number and ringer
equivalence number (REN) for this equipment. If requested, this information must be provided
to the telephone company.
2.This equipment uses the RJ11C USOC jack.
3.A plug and jack used to connect this equipment to the premises wiring and telephone
network must comply with the applicable FCC Part 68 rules and requirements adopted by
the ACTA. A compliant telephone cord and modular plug is provided with this product. It is
designed to be connected to a compatible modular jack that is also compliant. See installation
instructions for detail.
4.The REN is used to determine the number of devices that may be connected to a telephone
line. Excessive RENs on a telephone line may result in the devices not ringing in response
to an incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0).
To be certain of the number of devices that may be connected to a line, as determined by the
total RENs, contact the local telephone company.
5.If this equipment causes harm to the telephone network, the telephone company will notify
you in advance that temporary discontinuance of service may be required. But if advance
notice is not practical, the telephone company will notify the customer as soon as possible.
Also, you will be advised of your right to file a complaint with the FCC if you believe it is
necessary.
6.The telephone company may make changes in its facilities, equipment, operations or
procedures that could affect the operation of the equipment. If this happens the telephone
company will provide advance notice in order for you to make necessary modifications to
maintain uninterrupted service.
7.If trouble is experienced with this equipment, for repair or warranty information, please
contact Ricoh USA, Inc. Customer Support Department at 1-888-456-6457. If this device is
causing problems with your telephone network, the telephone company may request that you
disconnect the equipment until the problem is resolved.
8.In the event of operation problems (document jam, copy jam, communication error indication),
see the manual provided with this machine for instruction on resolving the problem.
9.Connection to party line service is subject to state tariffs. Contact the state public utility
commission, public service commission or corporation commission for information.
10.If your home has specially wired alarm equipment connected to the telephone line,
ensure the installation of this equipment does not disable your alarm equipment. If you have
questions about what will disable alarm equipment, consult your telephone company or a
qualified installer.
19