Assembly; Set Up And Connect; Horizontal Setting; Prepare The Remote Control - SPORTSTECH VP150 Manual De Instrucciones

Set up and connect

1. Select a suitable installation location with a distance of at least 1m around the device to avoid pos-
sible injuries. The surface for your assembly should be stable, level, clean and protected from impact
by a suitable underlay.
2. Connect the power cord to the device and the other end to the wall socket.

Horizontal setting

An incorrect setting can lead to an incorrect load or injury during training as well as to unwanted noise
development. Align the feet so that the device is truly level.
(If undefinable noises occur, please adjust the feet as described below.)

Prepare the remote control

1. Insert 2 x AAA into the remote control, paying
attention to the polarity.

ASSEMBLY

Horizontal setting
Feet
29
min. 1 m
START
STOP
LOW
TIME
MID
SPEED
+
HIGH
–
EN