Main Menu Functions; Time Function - Malaguti XTM X3M Manual De Uso Y Mantenimiento

INSTRUMENT AND CONTROL FUNCTIONING

MAIN MENU FUNCTIONS

A) TOD FUNCTION
1
This indicates the total distance travelled;
this value is never reset and remains even
after the vehicle is turned off (the total
2
distance travelled will be stored for 10 years
from the last time the vehicle was used).
3
B) RPM FUNCTION
4
This indicates the vehicle's engine speed
in revolutions per minute. This value is also
5 represented in graphical format by means
of a graphical bar (see Sub-menu
Functions).
6
7
A B
(revolution
counter)
8
9
H G
14
All manuals and user guides at all-guides.com
E
C D
F
C) STAND-BY (sub-menu)
When this image appears on the display,
you can switch the sub-menu display format
(graphical bar) from V-batt to RPM and vice
versa by pressing the MODE within 3
seconds. If this command is not given within
3 seconds, the instrument board switches
to the 0-40 function.
D) 0-40 FUNCTION
It shows acceleration from 0 to 40 km/h.
This function is automatically reset after 15
seconds. The function can be called up
again by starting the
E)

TIME FUNCTION

It shows the current time. To set the time,
hold the MODE button down until the sub-
menu (graphical bar) disappears, then
press the MODE button again to actually
change the time setting. Short presses of
the button result in slow changes. Hold the
button down for more than 10" to allow for fast adjustment. To
return to the normal display, do not press MODE for at least 3". If
power is disconnected, this function will be automatically reset.
The setting operation must be thus repeated. This operation must
be performed with the vehicle at a standstill.
ENGLISH
vehicle.