Sub-Menu Functions; Battery Charge Level - Malaguti XTM X3M Manual De Uso Y Mantenimiento

F) LAP FUNCTION
This is the chronometer. Press the MODE
button once to START the chronometer (all
previous data are reset); press again to
STOP. To use this function, press the MODE
button until you relocate the LAP function.
Values are given in MIN and
G) AVE FUNCTION
This indicates the average speed in km/h.
The calculation does not include stops
(speed = 0). To reset, hold the MODE button
down when the vehicle is at a standstill until
a '0' appears on the display.
H) TD FUNCTION
This indicates the partial distance. To reset,
hold the MODE button down with the vehicle
is at a standstill.
All manuals and user guides at all-guides.com
INSTRUMENT AND CONTROL FUNCTIONING

SUB-MENU FUNCTIONS

FUNCTIONS OF THE GRAPHICAL BAR
SEC.
The function is stored after 3 seconds.

BATTERY CHARGE LEVEL

function is automatically activated, irrespective of the function
selected, and the last dash of the graphical bar will flash. If you
change function, the battery logo will remain displayed until the
correct power supply is resumed.
RPM - ENGINE SPEED
ENGLISH
To select one of the graphical bar functions,
open the main STAND-BY menu. When "- -
- - -" appears on the display, press the MODE
button within 3". The graphical bar will switch
from displaying engine speed (RPM) to
battery charge level (V-batt) and vice versa.
This check should be made with the engine
off; if battery power drops to MIN., the symbol
will flicker, irrespective of the function
displayed.
When the battery charge level drops to its
minimum threshold, the battery level
When the battery warning light comes on, recharge the
battery as soon as you can!
This function shows engine speed in graph-
ic format. The numeric value can be dis-
played with the RPM function (revolution
counter) of the Main Menu.
1
2
3
4
5
6
7
8
9
15