Starting A Cold Engine; Starting A Warm Engine - Malaguti XTM X3M Manual De Uso Y Mantenimiento

STARTING A COLD ENGINE

1. Turn main switch to " ".
2. Pull the clutch lever or shift into neutral.
When the transmission is in neutral position, the neutral
indicator light should be on, otherwise have a MALAGUTI
Dealer check the electrical circuit.
3. Operate the choke if necessary, and fully close the throttle grip.
4. Press the starter pedal or press the START button to start the
engine.
5. After the engine has started, move the choke lever back half-
way.
For maximum engine life, never accelerate hard when
the engine is cold.
6. When the engine is warm, turn the choke off.
The engine is warm when it responds normally to the
throttle with the choke turned off.
All manuals and user guides at all-guides.com
OPERATION AND IMPORTANT RIDING POINTS

STARTING A WARM ENGINE

To start a warm engine, the choke is not required.
ENGLISH
Before using the vehicle for the first time, read the En-
gine break-in section.
1
2
3
4
5
6
7
8
9
25