View Exercise Record In Application - Oregon Scientific SE900 Manual Del Usuario

NOTE If you set the watch to automatically toggle screens, the last four screens automatically toggle to display every 5 seconds. Please
see SET USER PROFILE for turning on the toggle feature.
NOTE If you turn on HR zone, the watch displays Above Zone for 3 seconds when your particular heart rate is above the zone; or displays
Below Zone for 3 seconds when your particular heart rate is below the zone.
NOTE If the total number of laps and records reaches the 100th or the total hours of the exercise reaches 80 hours, memory full displays on
the screen with a long beep. You need to clear the memory for further exercise purpose.
NOTE HR belt low batt displays on the screen if the watch evaluates the chest belt is low battery.
VIEW EXERCISE RECORD DURING RUNNING
You could view records after running on the watch by following the below steps.
To view exercise records:
1. In RUNNING mode, press bottom (3) button to enter running memory (mem). The screen displays the latest exercise date and time. Toggle middle (2) button to select
the desired one, then press top (1) button to enter.
NOTE If you want to clear all the memory, toggle middle (2) button until Clear all displays. Press top (1) button to enter, then press top (1) button again to select yes
to confirm deletion of the memory; or press bottom (3) button to select no to go back to the record screen.
2. Press top (1) button to enter View Summary screen. Press top (1) button again to start viewing, then toggle middle (2) button to view the records.
OR
Press bottom (3) button to exit.
3. Press middle (2) button to enter View Lap screen. Press top (1) button to start viewing or toggle middle (2) button to view your desired lap.
4. Press top (1) button again to start viewing, then toggle middle (2) button to view the records.
OR
Press bottom (3) button to exit.

VIEW EXERCISE RECORD IN APPLICATION

You could upload the memory to your application and view the running records on the mobile device.
1. Enter the profiles page in your application. Tap RUNNING profile icon.
2. Running records are listed by date and time. Please follow the below steps.
• Tap the desired one you want to view or tap
Swipe the screen to left or right to view other set of records.
•
Other
data
to transmit the data by email.
9
Lap No.