Dati Tecnici; Lubrificazione; Technical Data - Husqvarna TE 610 Manual De Uso

DATI TECNICI

MOTORE
Tipo .........................monocilindrico a 4 tempi
Raffreddamento............a liquido, con doppio
radiatore ed elettroventola
Alesaggio ............................................mm 98
Corsa ...............................................mm 76,4
Cilindrata .....................................cm
Rapporto di compressione .....................11:1
Avviamento ........................................elettrico
DISTRIBUZIONE
Tipo.................monoalbero a camme in testa
comandato da catena; 4 valvole
Gioco delle valvole (a motore freddo):
Aspirazione.......................................0,05 mm
Scarico .............................................0,05 mm

LUBRIFICAZIONE

Tipo ...........forzata con doppia pompa a lobi
ACCENSIONE
Tipo...............Elettronica a scarica capacitiva
.......con anticipo variabile a controllo digitale
Tipo candela.........................."NGK" CPR 8E
Distanza elettrodi candela.......0,55÷0,65 mm
18

TECHNICAL DATA

ENGINE
Type...........................4-stroke single cylinder
Cooling....................................by liquid, with
twin-radiator and electric fan
Bore.....................................................3.85 in
Stroke .......................................................3 in
576,28 Capacity........................................35.2 cu. in.
3
Compression ratio...................................11:1
Avviamento .........................................electric
VALVE GEAR
Type ......................single overhead camshaft,
Valves clearance (with cold engine):
Inlet ...................................................0,002 in.
Exhaust .............................................0,002 in.
LUBRICATION
Type.................forced with lobe-twin-pump
IGNITION
Type ..............................Electronic C.D.I. with
adjustable advance (digital control)
Spark plugs type ................."NGK" CPR8E
Plug gap ................................0.022÷0.026 in.
MOTEUR
Type..............................un cylindre à 4 temps
Refroidissement ......par liquide avec double
Alésage................................................mm 98
Course ..............................................mm 76,4
Cylindrée ......................................cm
Rapport volumetrique..............................11:1
Démarrage ......................................éléctrique
DISTRIBUTION
Type .............................arbre à cames en tête
chain driven; 4 valves
Jeu des soupapes (avec moteur froid):
Admission.........................................0,05 mm
Echappement ...................................0,05 mm
LUBRIFICATION
Type ........forcé avec double pompe à lobes
ALLUMAGE
Type........electronique à décharge capacitive,
Bougie type ............................"NGK" CPR8E
(Distance électrodes bougie ....0,55÷0,65 mm
DONNEES TECHNIQUES
radiateur et électro-rotor
576,28
3
commandé par chaîne; 4 soupapes
avec avance variable