Starting The Slide Show Setup Screen; Starting The Slide Show Screen - Pioneer PDP-6010FD Manual De Instrucciones

Enjoying through External Equipment
12

Starting the Slide Show Setup screen

When the thumbnail screen is displayed, press RED to start the
screen to set up the Slide Show that sequentially changes images.
1
Select "Display Mode" ( / ).
2
Select "Normal" or "Full" ( / ).
• With "Full" selected, images are displayed using the full
screen.
3
Select "Playback Order" ( / ).
4
Select "Name Order" or "Random" ( / ).
5
Select "Number of Times of Playback" ( / ).
6
Select "Single Time" or "Loop" ( / ).
• With "Loop" selected, Slide Show is repeated until
RETURN is pressed.
7
Select "Playback Mode" ( / ).
8
Select "Auto" or "Manual" ( / ).
• With "Auto" selected, images are automatically changed
at the specified intervals.
• With "Manual" selected, the previous image is displayed
by pressing BLUE or the next image by pressing RED.
Home Gallery
HOME MENU Exit
9
If you have selected "Auto" in step 8, press
select "Interval(sec)", and then press
desired display duration for individual images.
• You can select from among 3 seconds, 5 seconds, 10
seconds, 20 seconds, 30 seconds, 60 seconds, and 90
seconds.
10
To start the Slide Show screen, press RETURN to display
the thumbnail screen and then press BLUE.
• To quit the Home Gallery function, press HOME MENU.
Note
• If you intend to display the Slide Show screen for an extend
period of time, select "FULL" for the screen size in order to
avoid image retention on the screen.
78
En
Slide Show Setup
Normal
Display Mode
Playback Order Name Order
Number of Times of Playback
Single time
Playback Mode
Auto
Interval(sec)
3sec
/ to select the

Starting the Slide Show screen

After setting up the Slide Show, you can start it to sequentially
change the images.
1
To start the Slide Show screen, press BLUE when a
thumbnail screen is displayed.
• With "Auto" selected for "Playback Mode", images are
automatically changed at the specified intervals.
• With "Manual" selected for "Playback Mode", press BLUE
to display the previous image or RED to display the next
image.
• While images are automatically changed, you can stop
and hold automatic image change for approximately five
minutes by pressing BLUE. To resume, press and hold
BLUE again.
2
When quitting the Slide Show screen, press RETURN to
restore the thumbnail screen or HOME MENU to quit the
Home Gallery function.
3
Select from normal screen or full screen by pressing
ENTER.
• Each press switches between the normal screen and the
full screen.
Note
• When paused during a slideshow is played, the screen is
automatically changed to the next image in five minutes.
• If no operation is continued for five minutes, the Home Gallery
function automatically finishes except on the Slide Show
screen.
/ to