Parameter Setting And Display; List Of Parameters - Sime BRAVA SLIM HE ErP Serie Manual De Instalation Y Mantenimiento

EN
– adjust the air thermostat and check that the boiler starts and
operates correctly
– carry out the procedure "Chimney sweeper function",
to check the mains gas pressure, detect the combustion
parameters and to measure the combustion efficiency
required by legislation in force.
3.3

Parameter setting and display

To go into the parameter menu:
– from the selected mode (eg. WINTER)
– press the buttons r and
at the same time until "PAR 01" (parameter number) and the
value set (0÷4) appears on the display
3.4

List of parameters

Type No. Description
PAR 01 Index showing boiler power in kW
PAR 02 Hydraulic configuration
PAR 03 Gas Type Configuration
PAR 04 Combustion configuration
PAR 08 External sensor value correction
PAR 09 Ignition fan speed
PAR 10 Boiler Antifreeze Threshold
External Sensor Antifreeze Threshold
PAR 11
-- = Disabled
PAR 12 Heating Curve Incline
PAR 13 Minimum Heating Temperature Adjustment
PAR 14 Maximum Heating Temperature Adjustment
PAR 15 Maximum power heating
PAR 16 Heating Post-Circulation Time
t (for approximately 5 seconds)
CONFIGURATION
DOMESTIC HOT WATER - HEATING
– press the button t to scroll up the list of parameters and
then r to scroll down the list
holding the buttons
NOTE:
scrolling movement.
– once the required parameter has been reached, press the
buttons > or < to modify the value within the permitted range.
The modifications are stored automatically.
When all the parameter modifications have been made, exit the
parameter menu by pressing and holding down the buttons
and t all at the same time
screen is displayed.
Range
0 = 24 kW
1 = 25 kW
2 = 30 kW
3 = 35 kW
4 = 40 kW
0 = rapid
1 = storage tank with thermostat or
heating only
2 = hot water tank with sensor
3 = bithermic
4=instant with solar power input
5 = open vent
6 = boiler with heat pump
0 = G20
1 = G31
2 = G230
0 = sealed chamber with combustion
control
1 = open chamber with smoke
thermostat
2 = Low Nox
-5 .. +5
80 .. 160
0 .. +10
-9 .. +5
0 .. 80
20 .. PAR 14
PAR 13 .. 80
0 .. 100
0 .. 99
r or t increases the speed of the
for at least 5 seconds until the initial
U/M Step Default
0 or 1 or 2
- 1
or 3 or 4
- 1
- 1
- 1
°C 1
RPMx25 1
°C 1
°C 1
- 1
°C 1
°C 1
% 1
seconds
1
x 10
r
0
0
0
0
128
3
-2
20
20
80
100
3
83