Maximum Electrical Capacity; Safety Instructions - Erbe BiClamp 110 Manual Del Usuario

OBJ_DOKU-194305-003.fm Seite 25 Montag, 5. Oktober 2020 10:12 10
4

Maximum electrical capacity

The maximum electrical capacity is given on the instrument in
[V ].
p
5

Safety instructions

This product may be used only by trained medical staff, who
have been shown how to use it according to the instructions for
use.
Always check the product for damage before use, including the
insulation or coating.
Erbe Elektromedizin recommends performing an electrical con-
tinuity test before every use of this product.
This can be carried out, for example, with a performance test on
a cloth soaked in sterile saline solution.
Note: If the cable conductor is broken or the electrical continuity
of the cable is interrupted in any other manner it can cause arc-
ing in the patient return line or in the active circuit; this can lead
to the patient suffering burns or the outbreak of a fire.
If damaged, do not use this product!
Do not use in the presence of combustible or explosive materi-
als!
Never lay this product on the patient or in his/her direct vicinity.
Protect this product from any form of mechanical damage! Do
not throw! Do not use force! If there is a cable, and unless stated
otherwise, do not kink it or wrap it around the accompanying
product!
Set down the product carefully. Do not drop or throw.
WARNING!
25