Gear Oil Replacement - TOHATSU MFS 25C Manual Del Propietário

Ocultar thumbs Ver también para MFS 25C:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

ENOM00096-A
Fuel filter (for fuel tank)
Water or dirt in the fuel tank will cause
engine performance problems.
Check and clean the tank at specified
times or after the outboard motor has
been stored for a long period of time (over
three months).
1. Remove the fuel pickup elbow of the
fuel tank by turning it counterclockwise
2. Clean the fuel filter and check the O-
ring. Replace it if necessary.
3. Reassemble all parts.
1
1. Fuel pick up
2. Filter
ENOM00098-A

Gear oil replacement

ENOW00094-0
WARNING
Be sure that outboard motor is secured
to transom or service stand, or acciden-
tal drop or fall of outboard motor could
lead to severe personal injury.
All manuals and user guides at all-guides.com
1. Tilt down the outboard motor.
2. Remove the oil plugs (lower and
2
3. Insert the oil tube nozzle into the lower
ENOF00926-0
INSPECTION AND MAINTENANCE
Be sure to lock outboard motor if it is
tilted up, or accidental fall of outboard
motor could lead to severe personal
injury.
Do not go under outboard motor tilted
up and locked, or accidental fall of out-
board motor could lead to severe per-
sonal injury.
upper), and completely drain the gear
oil into a pan.
oil plug hole, and fill with gear oil by
squeezing the oil tube until oil flows out
of the upper plug hole and bubbles is
disappeared to remove the air.
ENON00033-0
Note
Use genuine gear oil or the recommended
one (API GL-5: SAE #80 to #90).
Required volume: approx. 360 mL (11.8
fl.oz.).
71
ENOF01133-0
10

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Mfs 30c

Tabla de contenido