Gear Oil Replacement - TOHATSU MFS 9.9E Serie Manual Del Propietário

Ocultar thumbs Ver también para MFS 9.9E Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

64
INSPECTION AND MAINTENANCE
1
1. Fuel pick up
2. Filter
ENOM00098-A

Gear oil replacement

ENOW00094-0
Be sure that outboard motor is secured
to transom or service stand, or acciden-
tal drop or fall of outboard motor could
lead to severe personal injury.
10
Be sure to lock outboard motor if it is
tilted up, or accidental fall of outboard
motor could lead to severe personal
injury.
Do not go under outboard motor tilted
up and locked, or accidental fall of out-
board motor could lead to severe per-
sonal injury.
1. Tilt down the outboard motor.
2. Remove the oil plugs (lower and
upper), and completely drain the gear
oil into a pan.
All manuals and user guides at all-guides.com
2
ENOF01226-0
WARNING
3. Insert the oil tube nozzle into the lower
oil plug hole, and fill with gear oil by
squeezing the oil tube until oil flows out
of the upper plug hole and bubbles is
disappeared to remove the air.
ENON00033-0
Note
Use genuine gear oil or the recommended
one (API GL-5: SAE #80 to #90).
Required volume: approx. 465 mL (15.7
fl.oz.).
4. Install the upper oil plug, and then
remove oil tube nozzle and install the
lower oil plug.
ENOF01244-0
ENOF01245-0

Publicidad

Tabla de contenido
loading

Tabla de contenido