Gear Oil Replacement - TOHATSU MFS 40A Manual Del Propietário

72
INSPECTION AND MAINTENANCE
2. Clean the fuel filter and check the O-
ring. Replace it if necessary.
3. Reassemble all parts.
1
1. Fuel pick up
2. Filter
ENOM00098-A

Gear oil replacement

ENOW00094-0
10 Be sure that outboard motor is secured to
transom or service stand, or accidental
drop or fall of outboard motor could lead
to severe personal injury.
Be sure to lock outboard motor if it is
tilted up, or accidental fall of outboard
motor could lead to severe personal
injury.
Do not go under outboard motor tilted up
and locked, or accidental fall of outboard
motor could lead to severe personal
injury.
1. Tilt down the outboard motor.
2
ENOF00926-0
WARNING
2. Remove the oil plugs (lower and
upper), and completely drain the
gear oil into a pan.
3. Insert the oil tube nozzle into the
lower oil plug hole, and fill with gear
oil by squeezing the oil tube until oil
flows out of the upper plug hole and
bubbles is disappeared to remove
the air.
ENON00033-0
Note
Use genuine gear oil or the recommended
one (API GL-5: SAE #80 to #90).
Required volume: approx. 500 mL.
ENOF00927-0
ENOF00100-A