Gear Oil Replacement - TOHATSU MFS 40A Manual Del Propietário

68
INSPECTION AND MAINTENANCE
3. Reassemble all parts.
1
1. Fuel pick up
2. Filter
ENOM00098-A

Gear oil replacement

ENOW00094-0
Be sure that outboard motor is secured
to transom or service stand, or acciden-
tal drop or fall of outboard motor could
10
lead to severe personal injury.
Be sure to lock outboard motor if it is
tilted up, or accidental fall of outboard
motor could lead to severe personal
injury.
Do not go under outboard motor tilted
up and locked, or accidental fall of out-
board motor could lead to severe per-
sonal injury.
1. Tilt down the outboard motor.
2. Remove the oil plugs (lower and
upper), and completely drain the gear
oil into a pan.
2
ENOF00926-0
WARNING
3. Insert the oil tube nozzle into the lower
oil plug hole, and fill with gear oil by
squeezing the oil tube until oil flows out
of the upper plug hole and bubbles is
disappeared to remove the air.
ENON00033-0
Note
Use genuine gear oil or the recommended
one (API GL-5: SAE #80 to #90).
Required volume: approx. 500 mL.
4. Install the upper oil plug, and then
remove oil tube nozzle and install the
lower oil plug.
ENOF00927-0
ENOF00100-A