Gear Oil Replacement - TOHATSU MFS 40A Manual Del Propietário

Ocultar thumbs Ver también para MFS 40A:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Install fuel filter with all related parts in
place, or fuel leak could occur, leading
to catching fire or explosion.
Check fuel system regularly for leakage.
Contact authorized dealer for fuel sys-
tem services. Services by unqualified
person could lead to engine damage.
ENOM00094-0
Fuel filter (for engine)
1. Check in the cup for water and debris.
1
2
3
4
5
6
1. Body
2. O-ring
3. Filter
4. O-ring
5. Float
6. Cup
7. Arrow to indicate fuel flow direction
2. If present, disconnect hoses from the
fuel connector (male) and the fuel
pump.
3. Remove the cup, filter and O-rings
from the fuel filter body.
4. Check the wear and clogging for each
parts, and replace if necessary.
5. Remove fuel and any water or debris
from the cup, filter and hoses.
6. Reassemble all parts.
ENOM00096-0
Fuel filter (for fuel tank)
1. Remove the fuel pickup elbow of the
fuel tank by turning it counterclockwise
2. Clean the fuel filter or replace it if nec-
essary.
3. Reassemble all parts.
ENOM00097-0
Fuel tank
Water or dirt in the fuel tank will cause
engine performance problems.
Check and clean the tank at specified
times or after the outboard motor has
7
been stored for a long period of time (over
three months).
ENOF00096-A
1. Fuel pick up
2. Filter
ENOM00098-A

Gear oil replacement

ENOW00094-0
Be sure that outboard motor is secured
to transom or service stand, or acciden-
INSPECTION AND MAINTENANCE
1
2
WARNING
71
ENOF00926-0

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Mfs 50a

Tabla de contenido