Gear Oil Replacement - TOHATSU MFS 5C LPG Manual Del Propietário

52
INSPECTION AND MAINTENANCE
Oil volume needed for complete oil replacement
ENOW00925-0
Wipe off engine oil well immediately if spilled
and dispose of it in accordance with local
fire prevention and environment protection
regulations.
ENON00031-0
Note
If any amount of water is found in
engine oil, making it milky white, consult
dealer.
If engine oil is contaminated with fuel,
emitting strong fuel smell, consult
dealer.
Some oil dilution is normal if engine is
idled or trolled for long periods, espe-
cially in cooler water temperatures.
ENOM00122-0
LPG tank, gas hose and connector
inspection
ENOW00953-0
10
Be sure to select LPG tank, gas hose and
conne c tor in accordance with re com-
mended specification.
ENOW00954-0
Do not use a LPG tank expired life span.
Re qualification will be required after
specific years from the date of manufac-
ture. Please follow to the tank manufac-
tures' instruction.
Be sure to follow your tank, hose and con-
nector manufactures' inspection instruc-
tion.
450 mL (0.48 US qt.)
CAUTION
WARNING
WARNING
ENOM00098-A

Gear oil replacement

ENOW00094-0
WARNING
Be sure that outboard motor is secured to
transom or service stand, or accidental
drop or fall of outboard motor could lead
to severe personal injury.
Be sure to lock outboard motor if it is
tilted up, or accidental fall of outboard
motor could lead to severe personal
injury.
Do not go under outboard motor tilted up
and locked, or accidental fall of outboard
motor could lead to severe personal
injury.
1. Tilt down the outboard motor.
2. Remove the oil plugs (lower and
upper), and completely drain the gear
oil into a pan.
3. Insert the oil tube nozzle into the
lower oil plug hole, and fill with gear
oil by squeezing the oil tube until oil
flows out of the upper plug hole and
bubbles is disappeared to remove the
air.
ENON00033-0
Note
Use genuine gear oil or the recommended
one (API GL-5: SAE #80 to #90).
ENOF01514-0