50
REMOVING AND CARRYING THE OUTBOARD MOTOR
Do not carry or store outboard motor in
any of positions described below.
Otherwise, engine damage or property
damage could result from leaking oil.
Keep the outboard motor in a vertical posi-
tion when carrying.
The optional outboard motor stand is rec-
ommended for keeping the outboard
motor vertical both during transport and
storage.
8
ENON00021-A
Note
If the outboard motor must be laid down
be sure drain the fuel and engine oil,
then the port side faces down as shown
in the drawing below.
All manuals and user guides at all-guides.com
ENOM00072-A
3. Trailering
ENOF01219-1
ENOW00072-0
Trailering in the tilted position may cause
damage to the outboard motor, boat, etc.
ENOW00073-A
Be sure to disconnect fuel connector
except when operating engine.
Fuel leakage is a fire or explosion hazard,
which can cause serious injury or death.
ENOW00068-0
ENOF01220-1
Close air vent screw of fuel tank and fuel
cock before carrying or storing outboard
motor and fuel tank, or fuel may leak,
potentially catching fire.
Elevate power unit 2 inches to 4 inches if
traveling to avoid oil spillage.
CAUTION
WARNING
WARNING
ENOF01221-1
ENOF00075-1